E-mail:info@donghengmachinery.com

Products Details

STONE/MARBLE/TILES SHOT BLASTING MACHINE



Product NameStone shot blasting machine
Applied to wach materialH beams, Angles and flats, steel plates, steel pipes etc.
Applicable industrymachinery, foundry, forging, mechanical and steel industry
functionImprove anti-fatigue performance, Improve corrosion resistance
Voltage380V/50HZ or 220V/60HZWarrantyOne year
PowerElectricityCertificateCE, ISO 9001
ModelZJPLCSiemens, Omron
ProductivityCustomizedLow voltageSchneider
ConditionNewBrandsDongheng
ColorCustomizedSizeCustomized
Cleaning methodAutomaticElectrical control systemAuto-detection, auto-alarm and auto-cutout.
Material Metal/coilOriginShangdong, China
Cleaning materialShot steel/shot grit/wire cut etcAfter-sales serviceEngineers available to service machinery
If you have any question or concerns. please feel free to contact us.

 

 Equipment: auto rolls conveyor, blast wheel, blast chamber, screw conveyor, bucket elevator, separator, dust collector.



 


- Abrasive reclaim system:  3 classes full flow curtain hammer style.

- Safety control: Setup safety  interlock device between systems.

- Dust collector: pulse-jet cleaning bag filter to remove dust


 


▼Put stone plates on the loading lifter by forklift, then raise it to conveyor level, push  the switch.

The stone will be on the loading conveyor, and automatically send to blasting  chamber.

After blasting, stone plate will be send to the unloading conveyor, also the blow    motor will clean it better, and you just use unloading lifter to discharge it.


 


●Only need 2-3 operators for high capacity 100-200m2/h.

●Stone feeding speed and stone roughing effects adjustable.

●Shot blasting machine with roller conveyor can clean above and below the stone at  the same time.

●PLC control system, stable quality and easy to get support from local.

●With 3-stage rotating drum separator, separating rate can be 99.9%All shot blasting  machines are totally integrated with abrasive reclaim systems, separator and dust  collector.

●With pulse blowback cloth sack dust collector, the collection efficiency can be 99.5%  up.

●Machine with non-pit design easy for installation and movement.

●20 years experienced engineers, customized service avaliable.

●Obtain patent and ISO.

●After-sale service support will be provided within 24hours.


 For surface treatment of natural stone, stone slabs, marbles, paver block, glazed tiles, floor tiles, granite, ceramic, beton pieces or terrazzo etc.

 






Qingdao Dongheng Foundry Machinery Co., Ltd., is a professional foundry casting equipment manufacturers, Located in the Lingang Industrial Park, Huangdao District of Qingdao City, here is the manufacturing base, complete industry categories, mechanical and electrical supporting the environment and strategic location, land and sea air transportation facilities.

Southern Cross Harbor Tunnel through the Qingdao Railway Station, north cross-sea bridge in-line near Qingdao Airport.Foundry Machinery Co.,Ltd. Qingdao Dongheng the existing staff of about"! 00 people, covering an area of nearly 40 acres, plant area of over 10,000 square meters, is a collection of scientific research, design, manufacture, installation and commissioning, and technical advice as one of modern integrated machinery business.

Production of resin sand casting line, clay sand reclamation complete sets of equipment; V-process casting line, EPC modeling equipment; sand & shot blasting equipment; core shell machinery, core shooting machine, molding machine.

Complete sets of automatic molding line environmental protection equipment for casting enterprises to provide a full range of pre and post sales services.


 TECHNICAL ADVANTAGES:

Qingdao Dongheng Foundry Machinery Co., Ltd. research strength is strong, long-term friendly relations of cooperation with major domestic research institutes, such as a hospital in Bengbu, Shanghai nine homes, Shenyang Institute of Electrical and the Luoyang four of Hospitals, Zhengzhou six homes, always keep up with the latest technology in the industry to comply with the "quality first, customer first" service approach, with new product design, development, prototype, debug capabilities, business, and technical staff time and up close, the user needs profound practical experience, each product an improvement are for user convenience, the interests of users. The spirit of "scientific, rigorous and efficient" style of work in the shortest possible time in accordance with the requirements to provide users with the best technical solutions, and delivery in the shortest period quality. Through a wide range of technical exchanges and cooperation, the introduction of foreign advanced technologies that will make my company's products to reach the domestic advanced level.The sand casting, molding line, shot blasting various aspects of senior experts in leading technology work, the experts have a wealth of experience and high technology of the industry, our company's product quality and technical content are at the forefront of the industry .


          

 


1. What is the target market for this machine?

The Blaster is designed for customers who require a more sophisticated method than just manual cleaning in preparation for further processing or painting.


2. What type of abrasive media does it use?

The Blaster is designed to use the round steel shot. The shot is recycled inside the system and gets smaller and smaller during the blasting process, until it is completely consumed. Approximately two tons are required for start-up, and approximately 20 pounds are consumed per blasting hour. Replenishment is easily done as needed.


3. What utilities are needed to run the Blaster ?

The electrical system runs on three-phase input and a transformer will be provided for your supply voltage is required. The clean and dry compressed air supply is also needed.


4. What does it cost to operate?

The highly efficient turbines require much less power than competitor's shot blast machines. Including abrasive consumption, power consumption and maintenance, the total operating cost averages around $20 per hour in US. When comparing this to your current methods, keep in mind that the Blaster is at least 4 to 5 times as productive as manual cleaning and only one operator is required to load and run the machine while it is working. Labor costs are much lower, plus you will have a huge amount of extra capacity for cleaning.


5. Are there any special operator skills required for the Shot Blaster?

No, once the machine is installed and adjusted by our technician, running the machine consists of merely switching it on and setting the speed dial for the desired surface finish. Maintenance is simple too.


Inquire Now

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

+8615065325599